MIXVIBES U46MK2 Mode D'emploi page 14

U46MK2 MIXVIBES
(1) Config – Mouse Wheel
Sets the speed of your mouse wheel for input/output levels adjustments.
(2) Config – Latency
Sets the latency for your U46MK2. A typical value is 256 samples.
(3) Config – Factory Default
Resets the settings to factory default.
(4) Config – Always on Top
Allows you to keep the interface on top of other applications.
(5) Config – SampleRate
Sets the sample rate (44100 Hz or 48000 Hz).
Important note
Due to the limitations of the USB 1.1 driver, audio output at 48 kHz sample rate is
limited to 4 channels. If you need better audio quality and don't need all 6 outputs,
you can choose the 48 kHz sample rate. If your setup requires all 6 outputs, you
must choose the 44.1 kHz sample rate.
(6) Config – Buffer Number
Allows you to specify the number of buffers in order to diminish or improve latency and system
stability.
14