Playing a source
1 Press POWER / STANDBY to switch on the receiver.
2 Turn SOURCE SELECTOR to select a source.
The name of the source is displayed.
y
• You can select the FRONT AV/GAME input by pressing
FRONT AV (FR 760 only).
3 Start playback of the source as usual.
Adjusting the sound
• Turn VOLUME to adjust the volume.
VOLUME and the volume level between 0 and 50 is
y
displayed.
1 Press BASS or TREBLE.
BASS or TREBLE and the actual value are displayed
y
briefly. Then TURN VOLUME KNOB TO CHANGE is
scrolled.
2 Turn VOLUME to adjust the bass or treble.
BASS or TREBLE and the actual value are displayed.
y
Note : If VOLUME is not turned within 5 seconds or if any
other control is used, the bass or treble adjustment is
switched off.
• Press ±SMART SOUND on the remote control to scroll
through the built-in smart sounds: MOVIE, SPEECH,
MUSIC, MULTIMEDIA and PERSONAL.
(PERSONAL is the userdefined bass and treble setting.)
is displayed and the name of the chosen
y
SMART SOUND
sound profile is scrolled once if smart sound is on.
• Press LOUDNESS to switch loudness either on or off.
is displayed if loudness is on.
y
LOUDNESS
PLAYBACK, RECORDING
Recording from a source
If you wish to record from a source you must select it with
SOURCE SELECTOR. The incoming signal is reproduced by all
audio and – if the source includes a video signal – video
outputs of the receiver. The sound settings do not affect the
recording.
1 Turn SOURCE SELECTOR (or press FRONT AV – FR 760 only)
to select the source you want to record from.
y
The name of the source is displayed.
2 Prepare the desired recording appliance. It must be
connected to one of the outputs of the receiver.
3 Start recording on the recording appliance.
4 Start the playback of the source as usual.
Notes: – The audio and video signal of VCR IN is not
reproduced by VCR OUT. The same applies to the
audio signal of CDR/TAPE IN to CDR/TAPE OUT.
– From a source which is connected to the
6 CHANNEL / DVD IN audio input cannot be
recorded.
17