CALIMA 46006 Manuel De L'opérateur page 5

5. OPERATING INSTRUCTIONS
5.1 OVERVIEW
1 Washing head
2 Telescopic handle length adjustment
3 Handle
4 Hose connection with shut-o valve
Figure 1: Overview
5.2 HOSE CONNECTION
To start with, move the shut-o valve to the "closed" position,
Figure 2. Attach your hose to the hose connection (position 4 in the
overview) on the washing brush. To start washing, move the shut-o
valve to the "open" position.
closed
Figure 2: Shut-o valve
5.3 SET LENGTH OF TELESCOPIC POLE
Loosen the coupling nut on the telescopic extension to set the
length of the telescopic pole (position 2 in the overview). Pull out
the telescopic pole and then tighten the coupling nut once more,
Figure 3. Figure 3.
loose
tight
Figure 3: Setting the length
6. MAINTENANCE AND CARE
• After washing, rinse out any cleaning agents that may still be in
the product.
• Open the shut-o valve and let the water ow out. Residual water
may damage the washing brush in case of frosty conditions.
• Let the washing brush dry completely before using it once again.
• Hang the brush instead of storing it resting on the bristles.
open
7. NOTES REGARDING ENVIRONMENTAL PROTECTION
Dispose of the washing brush with telescopic pole in household
waste or with your local waste disposal authorities.
8. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
5