Samson RL112A Manuel D'utilisation page 8

Connecting XPD Wireless Microphone (sold separately)
1.
Plug the Samson XPD USB receiver into
the XPD Wireless USB jack on the rear
panel of the RL Loudspeaker.
2. Turn the CH2 Volume knob on
the RL Loudspeaker completely
counterclockwise.
3. Place a fresh set of AA (LR6) batteries
in the transmitter battery holder, taking
care to observe the polarity markings,
then replace the cover.
4. Turn on the power to the transmitter by
pressing and holding Power switch; the
indicator light on the transmitter and
receiver will light amber.
5. Speak or sing into the mic at a normal
performance level and raise the CH2
Volume control until the desired level is
reached.
8