Publicité
Les langues disponibles
Les langues disponibles
English
The Intellinet 8-Port Gigabit Ethernet Ultra PoE Switch with 4 Uplink Ports and LCD Screen offers an array
of time-saving, cost-effective features while providing superior network throughput. No configuration is
required and installation is plug and play. Thanks to its optional desktop and 19" rackmount design, superior
performance and value, the switch is the perfect choice for your small office home or home network.
With a backplane speed of 24 Gbps, plenty of performance is available for your computers, servers and other
networking devices. Each of the ports automatically senses the link speed of the connected network device
and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum performance. Designed to give ample
power to compatible devices that need them, this Ultra PoE switch offers up to 80 watts of power per port
until its power budget of 380 watts is reached.
Green Ethernet Technology
More often than not, a network switch does not utilize all its ports at all times. Normally, when a computer,
notebook, network printer or other network-connected device is powered down, the switch continues to
consume the same amount of power as if the port were still active. Now, thanks to the new, energy efficient
IEEE 802.3az technology, this Intellinet switch detects link status to all connected devices and reduces the
power usage of ports not in use. In addition, the switch can adjust the level of power output based on the
length of the network cable connected to a particular port. This feature allows for the enjoyment of maximum
network performance, and when things slow down, it automatically scales back power usage to conserve
energy and save money.
Front Panel
LED
Power
LNK/ACT
PoE
Rear Panel
Power
Use the included power cord to connect the device (on the rear panel) to an AC outlet. The device supports
AC 100 – 240 V, 50/60 Hz.
Chassis Ground Column
Located on the right side of the power supply connector, the grounding terminal connector is used to provide
proper grounding for your Intellinet data switch. If you use the chassis grounding screw, it should be wired to
2
8-Port Gigabit Ethernet Ultra PoE Switch with 4 Uplink Ports and LCD Screen
COLOR
STATUS
Off
Green
On
Off
Red
On
Flashing
Off
Green
On
Flashing
Off
Orange
On
Flashing
STATUS DESCRIPTION
No device is connected to the port.
A device is connected to the port at 10/100 Mbps speed.
Sending or receiving data.
No device is connected to the port.
A device is connected to the port at 1000 Mbps speeds.
Sending or receiving data.
No device is connected to the port.
A device is connected to the port.
Abnormal power supply.
Power Off
Power On
Publicité
