afriso DTA 20 E Notice Technique page 49

5.5 Mounting the measuring line to the control unit
1. Shorten the measuring line (B) to the required length.
2. Pull the measuring line (B) over the hose adapter (A) at the control unit.
3. Fasten the measuring line (B) with a cable tie to the hose adapter (A).
It is possible to connect the product to existing measuring lines (metal pipes)
of a decommissioned pneumatic tank contents indicator (for example, Uni-
top/Unitel) using the two enclosed cables ties.
If you use an existing measuring line, verify that the measuring line extends
all the way to the bottom tank bottom.
The measuring line (PVC) may harden over time if it is in contact with fuel oil.
Hardening of the measuring line does not interfere with the operation of the
product.
Mounting
A
B
DTA 20 E
EN
16