Intended Use; General Safety Instructions - H-Tronic AL 800 Mode D'emploi

Masquer les pouces Voir aussi pour AL 800:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Warnings and safety instructions
Before using this device, please carefully read this manual and follow the
instructions in it. It contains important information for the safe operation of the
unit. The law requires that this manual contains important information for your
safety and describes how the unit can be used safely, avoiding damages to the
unit and other installments. The manufacturer cannot be made liable for damages
resulting from negligent or intentional disregard of the instructions in this manual!
This manual is a part of the device and should be kept in a safe place. To
avoid malfunctions and damages, please pay attention to the following safety
instructions:
– Repairs of the unit should only be performed by a specialist!
– Dispose of the packaging material that is not needed. Children might play with
the plastic bags and risk suffocation.
– The unit and its components should not be handled by children and infants.
danger!
the device from the mains before opening it. Opening the device will
reveal components which have a live current and can be hazardous to your
health when touched.

1. iNteNded uSe

The device is designed for automatic charge and buffering of lead batteries with
2, 6 or 12 V terminal tension. A sliding switch carries out the set-up of the battery
voltage. Possible battery types are lead-gel, leadfleece or lead-acid-batteries.
Primary batteries (zinc-carbon, alkaline, etc.) or other battery types must not be
plugged in or charged. Another mode of operation other than the one specified
is not allowed and results in the damage of the product. In addition, this is linked
with dangers, such as short-circuit, firing, electric shock etc.

2. GeNerAl SAFety iNStructioNS

When handling electrical items, the VDE regulations need to be followed.
Especially VDE 0100, VDE 0550/0551, VDE 0700, VDE 0711 and VDE
0860.
– Before opening the device, make sure that it is disconnected from the mains.
– Tools may only be used on the device or components, if it is ensured, that the
The unit should only be opened by a specialist. Detach
Automatic Charger AL800
| 15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

2 24 32 18

Table des Matières