MasterCraft 068-0667-4 Manuel D'utilisation page 8

6
model no. 062-3582-8 | contact us 1-800-689-9928 model no. 068-0667-4 | contact us 1-800-689-9928
8. Attach the left door (Part 6) and
right door (Part 7) to corresponding
sides of the cabinet frame. Insert 10
M4 x 8 screws (Part 19) into each
door and tighten them using
screwdriver (Part 21) (see Fig. G).
9. Attach the bumpers (Part 14) to
the four corners of the bottom panel
by securing four M4 x 18 screws
(Part 18) for each bumper. Then
attach corners protectors A (Part 15)
and corner protectors B (Part 16) to
the four corners of the top panel
(Part 3) by securing five M4 x 8
screws (Part 19) on each corner
protector. Tighten the screws using
screwdriver (Part 21) (see Fig. H).
10. The storage cabinet is ready to
be used. Use the keys (Part 22) to
lock the left door (Part 6) and right
door (Part 7) of the cabinet, if desired
(see Fig. I).
Note:
This product provides fingerprint-re-
sistant surfaces and increased durability.
Stainless Steel Maintenance:
A fingerprint-resistant finish has been applied to these parts. Do not use traditional
stainless steel cleaners on this unit. Lightly wipe off once a month with clean warm
water and a soft cloth (preferably a microfibre cloth). This is the safest formula to
prevent new stains from appearing over time and manage unwanted fingerprints or
grease marks. Remember to always wipe in the direction of the surface grain
(NEVER ACROSS) and always use a lint-free cloth. Once the surface is clean,
thoroughly wipe dry with a soft absorbent cloth.
headline bars headline bars headline bars headline bars
Fig. G
continuation tabs continuation tabs continuation tabs continuation tabs
Fig. H
notes notes notes notes
warnings warnings warnings warnings
Fig. I