Atlas Copco PRO P2535-H Consignes D'utilisation Et De Sécurité page 6

Safety and operating instructions P2535-H
2
m/s
Vibration (according to ISO 8662)
Measured vibration value 32 (tem-
porary)
Spread in method and production -
Declaration of noise and vibration emis-
sion
These declared values were obtained by laboratory
type testing in compliance with the stated standards
and are not adequate for use in risk assessments.
Values measured in individual work places may be
higher than the declared values. The actual exposure
values and risk of harm experienced by an individual
user are unique and depend upon the way the user
works, the workpiece and the workstation design, as
well as upon the exposure time and the physical
condition of the user.
We, Atlas Copco Tools AB, cannot be held liable
for the consequences of using the declared values,
instead of values reflecting the actual exposure, in
an individual risk assessment in a work place situ-
ation over which we have no control.
Atlas Copco Tools - 9836 3979 00
6