Chauvet DJ EVE P-100 WW Guide De Référence Rapide page 4

EN
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
Menu Map
Mode
DMX Mode
Auto Program
Auto Speed
Sound Mode
Sound
Sensitivity
Dimmer
Dimmer Speed
Mode
Temperature
DMX Linking
The EVE P-100 WW can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 509.
Master/Slave Connection
The EVE P-100 WW uses the DMX data connection for its Master/Slave mode. Information about configuring the
EVE P-100 WW for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
D-Fi USB Connectivity
The EVE P-100 WW is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from CHAUVET
DJ. Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the product's DMX
Personality and DMX Address. Further instructions for connecting and configuring this product for D-Fi USB operation
are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause
damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display control/
menu buttons will be unavailable until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. Manual Digital Display/Menu Buttons
3
QUICK REFERENCE GUIDE
Programming Levels
1-CH
2-CH d 1–512
4-CH
P-- P 1–3
S-- S 1–100
Snd Snd1–2
SenS u 0–100
U-- d 0–255
OFF
dIM1
dIM
dIM2
dIM3
teMP _ _
Description
1-channel DMX mode
2-channel DMX mode
4-channel DMX mode
Sets auto program 1–3
Sets the auto program speed
Sets sound-active program
Sets sound sensitivity
0–100%
Dimmer speed settings: off, fast, medium, or slow
Displays current product temperature in °C
EVE P-100 WW QRG Rev. 2