Kalorik WCL 43915 Mode D'emploi page 25

PROBLEMAS Y SOLUCIONES
Problema
–
–
El dispositivo no
funciona
–
–
Vibraciones
–
–
–
Dispositivo no
–
enfria suficiente
–
–
–
–
–
–
–
–
Puerta no cierra
–
–
–
La luz LED no
–
funciona
–
–
www.KALORIK.com
Causa
Esta apagado
No esta enchufado a la
fuente de alimentación
El voltaje no coincide con el
suministro de energía
Fusible roto
Wine chiller is not level
The cooler is placed too
close to a heat source;
The bottles in the cooler
were just added to the
cooler
Bad ventilation
Fans don't work
The door is not closed tightly
or opened too frequently or
for too long time
The door gasket does not
seal properly.
Abnormal voltage
High ambient temperature
Wine cooler is not level
The door is not installed
properly
The gasket is dirty, shifted or
damaged
The shelves are not
positioned correctly
Content in the appliance is
preventing door from
closing
Not plugged in
Fuse broken
LED lights are broken
The light button is "OFF"
Solución posible
Plug appliance to power
–
outlet
Check socket is not
–
tripped
Check voltage
–
Contact customer service
–
Check to assure that the
–
appliance is level
Adjust feet accordingly
–
Keep the cooler away
–
direct sunlight or other
heat sources
Give it time for the bottles
–
to cool to the desired
temperature
Place the cooler in the
–
area with good ventilation
do not obstruct the fans
Fan may need to be
–
replaced. Please contact
customer service
Change the gasket
–
Maintain door closed for
–
an extended period
Make sure the room is not
–
more than 30ºF above the
target temperature
Check to assure that the
–
wine cooler is level, adjust
feet accordingly
Check the gaskets
–
Check shelves and,
–
rearrange protruding
bottles
Plug in appliance
–
Check socket is not
–
tripped
Press the light button ON
–
25 WCL 43915 – 200605 REV2