oneConcept Montgolfier Mode D'emploi page 29

While in Normal Mode press the ALARM key to enter the High Alarm Mode, Press the ALARM key
again to enter Low Alarm mode, press the ALARM key the third time to return the Normal Mode.
Remark: after the initial pressing of ALARM key, the display will be refreshed to show current
high, low alarm values. Normal alarm value will be displayed only for those already activated,
all other not activated values will be displayed with "- - -"or "- -"instead.
In High Alarm Mode press the SET key to select the following alarm modes:
• Time alarm
• Wind speed high alarm (0-50m/s)
• Gust speed high alarm (0-50m/s)
• Wind direction alarm
• 1Hour rain high alarm (0-999.9mm)
• 24 hour rain high alarm (0-999.9mm)
• Outdoor humidity high alarm (1%-99%)
• Outdoor temperature high alarm (-40˚C--60˚C)
• Wind chill high alarm (-40˚C--60˚C)
• Dew point high alarm (-40˚C--60˚C)
• Indoor humidity high alarm (1%-99%)
• Indoor temperature high alarm (-9.9˚C--60˚C)
In Low Alarm Mode press the SET key to select the following alarm modes:
• Time alarm
• Outdoor humidity low alarm (1%-99%)
• Outdoor temperature low alarm (-40˚C--60˚C)
• Wind chill low alarm (-40˚C--60˚C)
• Dew point low alarm (-40˚C--60˚C)
• Indoor humidity low alarm (1%-99%)
• Indoor temperature low alarm (-9.9˚C--60˚C)
In the alarm modes, press + key or MIN/MAX key to change or scroll the alarm value.
Hold the + key or MIN/MAX key for 2 second will increase/decrease digits in great steps. Press
the ALARM key to select the alarm on or off (if alarm is enabled, the speaker icon on the LCD
will be turned on indicating the alarm function has been enabled).
Press the SET key to toggle through each alarm mode until it returns to the normal display
mode.
Press HISTORY key or key idle 30 second at any time, the alarm mode will return to Normal
Mode
Canceling the Temperature Alarm While Sounding
a. When a set weather alarm condition has been triggered, that particular alarm will sound for
120 second and flash until the weather condition doesn't meet the user set level. Press any
key to mute the alarm, but the alarm icon will flash until the weather condition doesn't meet
the user set level.
b. The alarm will reactivate automatically once the value has fallen below the set value.
Alarm Modes
29