Sony WAHT-SD1 Mode D'emploi page 10

8
Press X/x to select [YES], then press
.
AUTO CALIBRATION
Connect calibration mic. Start
measurement?
Auto Calibration starts.
Note
• Loud test sound is output when [AUTO
CALIBRATION] starts. You cannot turn the
volume down. Give consideration to children
and neighbors.
• Avoid being in the measurement area and
making noise during the measurement (which
takes about 3 minutes), as it may interfere with
measurement.
9
Unplug the calibration mic and press C/
c to select [YES].
Quick Setup is finished. All connections
and setup operations are complete.
Measurement complete.
FRONT L :
FRONT R :
CENTER :
SUBWOOFER :
SURROUND L :
SURROUND R :
If OK, unplug calibration mic and select
"YES".
Note
• Reflections from walls or the floor may affect
measurements.
• If measurement fails, follow the message then
retry [AUTO CALIBRATION].
• When you select [SECOND ROOM] for
[SPEAKER FORMATION], the measurement
of [SURROUND L] and [SURROUND R] are
not displayed.
10
Press
10
GB
YES
NO
YES
YES
NONE
YES
NONE
NONE
YES NO
.