Morphy Richards 40715 Mode D'emploi page 2

40715-40-41 inc AUS:9225 47507 MEE pump - Jon
2
g
GETTING THE BEST
FROM YOUR NEW
IRON....
Safety first
Caution must be used when
handling this appliance as it does
get very hot. Always switch off the
unit and allow to cool before
cleaning or storing.
Jet cleaning (Certain models)
Your iron will give the best ironing
results and will last longer if you
apply jet cleaning after each period
of ironing.
Self cleaning (Certain models)
Your iron will give the best ironing
results and will last longer if you
clean the soleplate once a month.
IMPORTANT SAFETY
INSTRUCTIONS
The use of any electrical appliance
requires the following common
sense safety rules.
Primarily there is danger of injury or
death and secondly the danger of
damage to the appliance. These are
indicated in the text by the following
two conventions:
WARNING: Danger to the
person!
IMPORTANT: Damage to the
appliance! In addition we offer the
following safety advice.
Location
• Do not use outdoors.
• The iron must be used and rested
on a stable surface.
• When placing the iron on its heel,
ensure that the surface on which
the heel is placed is stable.
Children
• Close supervision is necessary
when any appliance is used near
children.
7/3/08 15:28 Page 2
• Young children should be
supervised to ensure that they do
not play with the appliance.
Personal safety
• This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
• WARNING: Burns can occur
from touching hot metal parts,
hot water or steam. Use caution
when you turn a steam iron
upside down, there may be hot
water in the water tank.
• WARNING: To protect against
the risk of electric shock do not
put the appliance in water or in
any other liquid.
• Do not use the vertical steam
feature on clothes that are being
worn.
• Do not leave the iron unattended
whilst plugged in or on an ironing
board. Never allow the mains lead
to over hang the work surface.
• The socket should always be off
before plugging or unplugging from
the socket. Never yank the cord to
disconnect from the socket, instead,
grasp plug and pull to disconnect.
• Do not allow the cord to touch hot
surfaces. Let the iron cool
completely before putting away.
Loop cord loosely around the iron
before storing.
Other safety
considerations
• Use the iron only for its intended
use.
• Always disconnect the iron from the
electrical socket when filling with
water or emptying, and when not in
use.
• Do not operate the iron with a
damaged cord or if the iron has
been dropped, damaged or leaking.