Krups 3MIX9000 Serie Mode D'emploi page 16

EN
ACCESSORIES*
RECIPES
depending on model
SOUP BLENDER BASE
VEGETABLE
«SLICE»
CUTTER c8
VEGETABLE
«COARSE
GRATING»
CUTTER c9
VEGETABLE
«FINE
GRATING»
CUTTER c10
«GRINDING TO A
POWDER»
VEGETABLE
CUTTER c11
«CUTTING IN
STRANDS»
VEGETABLE
«CRUSHING ICE»
CUTTER c12
MINI CHOPPER
«CHOPPING»
TROUBLESHOOTING
PROBLEM
The appliance has stopped working.
My appliance does not turn on.
The turbo does not work
I am unable to attach the whisks (a6)
and dough hooks (a7)
The mixer attachment does not work. Incorrect use: you have used the
RECYCLING
INGREDIENTS
100 g leeks, 100 g carrots, 100 g
potatoes, 300 g water.
Cook vegetables in salted water for
20-25 minutes or until tender.
Potatoes, red beetroot,
carrots, cucumber, cabbage.
Potatoes, red beetroot,
carrots, cheese.
Cheese, carrots.
Dry foods (almonds, walnuts,
hazelnuts, parmesan).
Potatoes.
Ice.
Garlic, herbs, onions, 70g of beef
cut up into 1x1x1 cm cubes
CAUSE
Your appliance is installed with a
micro-processor which controls the
power of the appliance. For safety
reasons, if the functioning time is too
long and/or if there is too much food
in the bowl, the appliance will stop
working.
Your appliance is not plugged in.
The safety lock is on.
You have already reached the maximum
speed with the speed setting (a3)
Incorrectly attached
speed setting instead of the 'whisk
ejection' button.
16
SPEED MAX TIME
Normal speed
for blender base 2 min.
(button a4).
Maximum speed. 2 min.
Maximum speed. 2 min.
Maximum speed. 2 min.
Maximum speed. 2 min.
Maximum speed. 1 min.
Standard speed of
the mixer function 3 sec'.
a4
SOLUTION
To restart your appliance, turn the
button (a3) to position '0'. Remove
part of the food.
Allow your appliance to cool down for
a few minutes. Then you can continue
to prepare your recipe.
Check the plug, power cable and
power supply.
Turn the speed setting to '0' and then
turn on the appliance.
The turbo allows you to directly reach
the maximum speed without using the
speed setting. (a3)
Ensure the accessories are correctly
attached (fig. 2).
Use the button (a4) to operate the
mixer attachment function (fig.27).