Wagan Tech Smart AC 150 USB+ Guide D'utilisation page 4

Smart AC 150 USB+
®
Operation
Verify the fuse size of your vehicle cigarette lighter socket. If the fuse
is a 10A fuse, your output will be limited to 120W. Most recent vehicle
models come with 15A fuses.
For Power Cord with Cigarette Lighter Adapter Installed:
i. Insert the DC plug into the vehicles accessory socket.
ii. Turn the ignition switch to the accessory position, if necessary.
iii. Insert appliance plug(s) into AC socket(s) at the front of the
inverter.
iv. Turn on the power switch that is located on the front of the
inverter.
v. The green LED will light to confirm that AC output is present.
vi. After use, turn OFF the inverter and disconnect the plug from
the accessory socket.
USB Power Port
When the inverter is powered on, the USB Power Port provides
5 volts DC up to 2.1 Amps for charging tablets and e-readers,
cell phones, mp3 players, and more.
included.)
Follow the instructions below to power the inverter.
i. Connect the device to the adapter cord.
ii. Plug the USB connector into thee USB Port.
iii. Turn on the device.
iv. After use, turn off the device and turn off the inverter.
v. Disconnect the USB connector from the inverter.
vi. Disconnect the inverter from its power source.
3
by Wagan Tech
™
www.wagan.com
®
(Charging/power adapter cord not