Wagan Tech Smart AC 150 USB+ Guide D'utilisation page 3

Operating Environment & User Responsibility
• Unplug the inverter when starting the vehicle's engine.
• Unplug or disconnect the inverter when it is not in use.
• Keep at least one inch of clearance around the inverter for air
flow.
• Keep the inverter and all cords dry.
• Secure the Inverter to keep it from changing position while a
vehicle is moving.
• Know the wattage requirements of your appliances. Appliance
total wattage can not exceed 150 watts.
• Make sure the inverter is connected to the correct voltage and
polarity.
• Do not connect the inverters AC output to another AC power
source. Damage will result, voiding the inverter's warranty.
• The 12 volt supply must provide between 10 volts to 14.5 volts
DC.
• Do not use an extension cord between the DC power source
and the DC input of the inverter. An extension cord can create a
voltage drop that can reduce efficiency and output.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
©2012 Wagan Corporation. All Rights Reserved.
2