Controller; Operation - oneConcept Multidesk Comfort Mode D'emploi

EN
Memory/
Screen
Timer
lock
(unlock)
54

CONTROLLER

Control Panel
Upward
movement
Downward
movement

OPERATION

Activate the System: Touch the screen. The "---" will appear on the display.
Then, press and hold the "M" button for 3 seconds.
The current height will display, and you can start operating the system.
Height Adjustment: Press and hold the up button to lift the desk. Press and
hold the down button to lower the desk.
Timer: The timer is designed to inform users to stand up after a set period
of time. Press the "T" button to set the period of time. The display will flash
"0.5 h" for 0.5 hour. Each press of the "T" button leads to a 0.5 hour increment.
The maximal setting of time is 2 hours. When the display stops flashing, then
the period of time is successfully set. And the indicator light on the top right
of panel will be on. When the set time is up, the buzzer will beep to remind
the users. The timer will turn off automatically after a long beep. To cancel the
timing, press "T" button for 5 times until the display shows the current height
and the indicator light is off.
Display
Memory
1 / 2 / 3 1 / 2 / 3
Indicator
light