oneConcept Multidesk Comfort Mode D'emploi page 44

EN
44
Connecting Cords and Attaching the Control Box
Turn over the desk frame with the crossbar facing up.
CAUTION
Risk of injury! At least two persons are required to turn the
desk frame. If only one person turns over the desk frame,
serious bodily injuries might occur.
Connect the two motor cords
to the two ports on the right
marked "M1" and "M2".
Connect the controller (J) cord
to the port marked "P2" on the
right.
Insert the power plug (I) on the
port on the left.