Schwaiger DiSEqC 9 Instructions De Montage page 10

DiSEqC Multiswitch - Mounting Instructions
The multiswitch serves for analog and digital reception of two satellite systems or eight frequen-
cy levels.
It provides the option to feed in terrestrial channels, e.g. in order to integrate FM radio stations
or local analog oder digital (DVB-T) TV stations into the TV network.
HINT: Please read the operating instructions carefully and be aware to observe
all security hints before starting your multi-switch system.
1.0. Explanation of the terms used in the Mounting Instructions
Analog channels:
= „low" frequency band (frequency range : 10.70 - 11.70 GHz)
Digital channels:
= „high" frequency band (frequency range : 11.70 - 12.75 GHz)
Vertical plane of polarization (V) : DC voltage typ. +14 V
Horizontal plane of polarization (H) : DC voltage typ. +18 V
Characteristic frequency 22 kHz :
The 0/22 kHz characteristic frequency is used
for switching from the LNB1/low band to the LNB1/high band.
DiSEqC := Digital Satellite Equipment Control
Tone burst (also called Simple DiSEqC or Mini DiSEqC) :
In addition to the 14/18 V option used for polarization switching and the
0/22 Hz option used for frequency band switching, the tone burst is a further option for
switching between two SAT positions (LNB1/LNB2).
DiSEqC Level 1.0:
The „one way" bus protocol uses the complete DiSEqC command set.
DiSEqC Level 2.0:
The „two way" bus protocol uses the complete DiSEqC command set.
Energy saving mode:
• see 3.3
10 10