Axis M7014 Mode D'emploi page 9

Installation Guide
This Installation Guide provides instructions for installing AXIS M7014 Video Encoder on your
network. For other aspects of using the product, see the User Manual available at www.axis.com
Installation Steps
1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 9 .
2. Study the hardware overview. See page 10.
3. Study the specifications. See page 13.
4. Install the hardware. See page 14.
5. Access the product. See page 14.
Package Contents
• AXIS M7014 Video Encoder
• Power adapter, type PS-K
• Mounting kit
- 4 screws and 4 plugs to mount the encoder to a concrete wall
- 4 Surface protection pads
- Terminal block connectors (RS-485/RS-422: 2 x 2-pin connector, Power: 2-
pin connector)
• Printed materials
- Installation Guide (this document)
- Extra serial number label (2x)
AXIS M7014 Video Encoder
9