Publicité
Les langues disponibles
Les langues disponibles
Page 8
4. Connect the pan/tilt power supply to the pan/tilt connector (J4) in the power supply.
5. If using the day/night sensor, connect the illuminator cable to the illuminator connector (J5) in
the power supply.
6. If using the day/night sensor, adjust the potentiometer to increase or decrease the sensitivity of
the day/night sensor. see Day/Night Sensor, on page 9.
Connect the mains supply cable to the mains supply connector in the power supply.
N
L
1 2
7. Close the power supply and tighten the lid screws.
8. Screw the cable gland caps on firmly.
AXIS Q87-E 230/120 V AC Installation Guide
F1
F2
J3
J2
J1
L
N
TR1
TR2
TR3
3
1
Mains supply connector
2
Main supply cable
3
Pan/tilt connector
4
Pan/tilt power supply cable (24 V AC)
5
Illuminator connector
6
Illuminator cable
7
Potentiometer
L1
L2
K1
J4 J5
TR4
24~
24~
status
-
+
4
5 6
P1
J6
7
Publicité
