Father's Cooker KY01 Manuel Du Propriétaire page 16

Cleaning the burner assembly –
1. Turn gas off at the control knobs and LP tank.
2. Remove cooking grid and flame tamer.
3. Remove grease cup.
4. Remove burner by unscrewing 2 tapping screw.
5. Lift burner up and away from the gas valve orifice.
6. Clean inlet (venturi) of the burner with small bottle brush or compressed air.
7. Remove all food residues and dirt on outside of the burner surface.
8. Clean any clogged ports with a stiff wire (such as an opened paper clip).
9. Inspect burner for any dam age (cracks or holes). If damage is found, replace with new burner. Reinstall
burner; check to ensure that gas valve orifices are correctly positioned inside burner inlet (venturi). Also
check position of spark electrodes.
For parts or service please call
+1418.934.6876
Toll free Canada & USA : +1.833.582.3355
or email
info@fatherscooker.com
or visit our website
https://www.fatherscooker.com
95 rue de Lisbonne SUITE 103,
Saint-Augustin-de-Desmaures,
Canada, Québec, G3A 0M9
Thank you for being part of the Father's Cooker™ family.
© Les Accessoires Multifonctions Inc. 16 Father's Cooker™ - V2.0