Publicité
Les langues disponibles
Les langues disponibles
29
9. To remove coffee, carefully press a glass or a coffee mug against the coffee dispenser (6).
After the preset duration of the keep-warm function has expired, the device automatically
switches to stand-by mode. The operating lamp in the START / STOP button goes out.
Warming Up Coff ee
To warm coffee up again, press the START / STOP button (16) and hold it down for
approx. 3 seconds. The preset time for the keep-warm function is activated again and the
coffee is reheated (see the "Handling and Operation" chapter | "Keep-Warm Function").
Making Iced Coff ee
1. Prepare the coffee machine, add coffee powder, pour in water, insert a fi lter and if nec-
essary set the brew strength and the keep-warm function (see the previous chapter).
When you do this, make sure that the tank is fi lled for no more than 6 cups!
The coffee needs to be brewed stronger for iced coffee. We recommend two
heaped measuring spoons for each 125 ml cup.
2. Fill the coffee tank (2) up to the 10-cup mark on the fi ll-level indicator with ice cubes.
3. Set the keep-warm function to the 0 setting using the WARMHALTEN (KEEP WARM)
button (12) (see the "Handling and Operation" chapter | "Keep-Warm Function").
Making Coff ee with a Preset Time
1. Prepare the coffee machine, add coffee powder, pour in water, insert a fi lter and if nec-
essary set the brew strength and the keep-warm function (see the previous chapter).
2. Hold down the TIMER button (11). The time display 19:99 fl ashes on the display (10).
3. Use the buttons S (14) and M (13) to set the start time you want (see the "Handling
and Operation" chapter | "Time").
4. Let go of the TIMER button.
5. To activate the preset time, press the TIMER button again. A beep sounds, the op-
erating lamp in the button lights up and START TIMER appears on the display. The
preset time is activated.
Once the preset time is reached, the device switches on automatically. The operating
lamp in the TIMER button goes out and the operating lamp in the START / STOP button
(16) lights up.
Deactivating the Preset Time
To deactivate the preset time setting again, press the TIMER button (11). The operating
lamp in the button goes out and the programming is deactivated. However, the preset
time is saved until a new time is programmed in or the device has been disconnected
from the power supply.
03840_DE-EN-FR-NL_A5_V2.indb 29
03840_DE-EN-FR-NL_A5_V2.indb 29
EN
27.09.2017 08:25:11
27.09.2017 08:25:11
Publicité
