Télécharger Imprimer la page

Toparc MATCHPEN Mode D'emploi page 13

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
SAFETY INSTRUCTIONS
Device complies with europeans directives.
EAEC Conformity marking (Eurasian Economic Community).
This product should be disposed of at an appropriate recycling facility. Do not dispose of in domestic
waste. Contains one lead-acid battery.
Class II device.
Never use close to flames.
Never look directly at the light source to prevent glare.
Complies with RoHS European directive, regarding the restriction of the use of certain hazardous
substances in electrical and electronic equipment.
DESCRIPTION
Multimatch is a robust and powerful work lamp, delivering 2000 lumens. It can be used without cable on battery, depen-
ding on the task.. The lamp features a 2 level light feature for up to 6h autonomy on battery. The flexible support allows
the lamp to be positionned in the desired angle .
Multimatch is ideal as a general work light and for quality control between various car body operations.
POWER SUPPLY
It must be connected to an EARTHED power supply 100-240V 50/60 Hz in alternate current.
Charging instructions
The red LED indicates that the battery is charging.
The green LED indicates that the battery is fully charged.
A fully discharged battery can cause it to be damaged.
Never store the discharged battery for a prolonged period. If the lamp is not used for one month or more, first
charge the battery to 100%.
If the lamp is not used for one month or more, it is recommended to charge it once a month.
Warning : When the lamp is on and the charger is connected, the battery does not charge.
Protect the power supply cable from oil, heat, cutting objects or surfaces.
Put the cap back on the cable output to keep the device waterproof.
To increase the battery lifetime, it should not be charged excessively.
Only use batteries of identical quality for replacement (11,1V / 4400 mAH Li-Ion).
MATCHPEN, SUNMATCH & MULTIMATCH
EN
13

Publicité

loading