Télécharger Imprimer la page

Toparc MATCHPEN Mode D'emploi page 11

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
SAFETY INSTRUCTIONS
Device complies with europeans directives.
EAEC Conformity marking (Eurasian Economic Community).
This product should be disposed of at an appropriate recycling facility. Do not dispose of in domestic
waste. Contains one lead-acid battery.
Class II device.
Never use close to flames.
Never look directly at the light source to prevent glare.
Complies with RoHS European directive, regarding the restriction of the use of certain hazardous
substances in electrical and electronic equipment.
DESCRIPTION
Sunmatch is a working lamp that allows an excellent colour perception. A portable lamp, it is easy to carry and can even
be fixed to a belt thanks to its hook. The lamp can be placed anywhere thanks to its powerful magnet. The flexible lamp
hand tilts up to 180 degrees.
Sunmatch is ideal forinspection during polishing, painting and cleaning operations.
POWER SUPPLY
Sunmatch is supplied with a Li-Ion battery and an intelligent charge level indicator .To prevent overheating risks, the
lamp switches off after being used at full power for 3 minutes. The charging station can be fitted onto a wall and its
magnetic base allows it to be fixed to a working table.
It must be connected to an EARTHED power supply 100-240V 50/60 Hz in alternate current.
Charging instructions
Charge the battery for at least 10 hours before first use. The battery must not remain discharged for too long. A deeply
discharged battery risks to be damaged. When not using the lamp over a long period, charge once a month.
Charge the battery as soon as the LED starts blinking.
The red LED switches on when the battery level is too low. In this event, charge it as soon as possible.
When placing the lamp on the charger, the red LED starts blinking to signal the charge . This process can take
between 30 minutes and 3 hours. When the LED emits a constant red light, this means the battery is charged.
If the LED keeps blinking after 3h, unplug the charger and redo the operation.
If even after that the battery still does not charge properly, it will have to be replaced.
It is recommended to not open the lamp as it could lose its waterproofing.
MATCHPEN, SUNMATCH & MULTIMATCH
EN
11

Publicité

loading