Publicité
Les langues disponibles
Les langues disponibles
CLEANING THE CONDENSER UNIT
Please clean the condenser unit approximately once every 3 months if frequently used.
Do not damage the condenser unit!
1. Leave the dryer to cool down.
2. Residual water may leak out, place an absorbent cloth under the maintenance cover.
3. Unlock the maintenance cover.
4. Completely open the maintenance cover.
5. Turn both locking levers towards each other.
6. Pull out the condenser unit.
7. Rinse the condenser unit with water to remove lint and fluff; let the water drain properly.
8. Clean the seals.
9. Re-insert the condenser unit, with the handle at the bottom.
10. Turn both locking levers.
11. Close the maintenance cover until it locks into position.
WARNING! Clean with water only; do not use hard/sharp-edged objects!
Do not operate the dryer without the condenser unit!.
TROUBLESHOOTING
Many malfunctions and faults that might occur in daily operation can be easily remedied. Time and money will be saved
because a service call will not be needed.
The following guide may help you to find the reason for a malfunction and correct it.
Display
Reason
Heating problem
Humidity sensor error
Temperature sensor error
• Only authorised technicians can carry out repairs.
• If the LED displays a different error code and the dryer does not work, please call the customer service.
• Before you call the customer service, please check if you can resolve the problems yourself, consulting the user instructions.
Solutions
Please contact the customer service if the problem persists.
EN - 37
Publicité
