Publicité
Les langues disponibles
Les langues disponibles
REQUIRED SPACE FOR INSTALLING
WARNING!
• Stability is important to prevent the product from moving across the installation site! Make sure
to level the appliance and install it on a stable base in longitudinal and traverse direction by screwing
the adjustable feet up or down.
• Make sure the appliance is not standing on the power cord.
• Make sure to observe the minimum required clearances from the walls as indicated in the figure.
• Do not place the appliance on a carpet with long fibres, as this may impede air circulation.
i
The room in which the appliance is placed must meet the following requirements:
1. Dry, level and stable solid base
2. Avoid direct sunlight
3. A clean location, where dirt does not accumulate. Air must be able to circulate freely around the
appliance. Do not obstruct the front air inlet or the air intake grills at the back of the machine.
4. Room temperature is between 10°C and 25°C
5. Place the appliance in a well-ventilated room, as the use of this appliance may generate heat and
humidity. Keep far away from heat sources such as coal, gas or wood burning appliances
6. Do not stack this dryer on a washing machine without a stacking kit.
UNPACKING THE APPLIANCE
WARNING!
• Move the appliance with at least two people and wear protective clothing, such as sturdy gloves.
• Packaging material (e.g. films, styrofoam) can be dangerous for children.
• There is a risk of suffocation! Keep all packaging away from children.
INSTALLING THE EXTERNAL DRAINAGE HOSE (INCLUDED)
• Install the external drainage hose if you do not want to use the internal condensate tank.
Use pliers to remove the
drain hose from the hose
connector
INSTALLATION AND CONNECTION
Insert the external
drainage hose
EN - 29
Put the hose holder into a drain pipe,
wash basin or any other sink.
W ≥ 10 cm
Publicité
