EN
interpretation of these symbols will allow you to operate the
tool better and safer.
Symbol
V
A
W
min
2.7
RISK LEVELS
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
SYM-
SIGNAL
BOL
DANGER
WARNING
CAUTION
Explanation
Voltage
Current
Power
Time
Alternating current-Type or charac-
teristic of current.
Direct current-Type or characteristic
of current.
Precautions that involve your safety.
Read and understand all instructions
before operating the product, and fol-
low all warnings and safety instruc-
tions.
Do not expose the product to rain or
moist conditions.
Wear eye protection.
Thrown objects can ricochet and re-
sult in personal injury or property
damage. Wear protective clothing and
boots.
Do not operate on inclines greater
than 15°.
MEANING
Indicates an imminently haz-
ardous situation,which, if not
avoided, will result in death
or serious injury.
Indicates a potentially hazard-
ous situation,which, if not
avoided, could result in death
or serious injury.
Indicates a potentially hazard-
ous situation, which, if not
avoided, may result in minor
or moderate injury.
English
SYM-
SIGNAL
BOL
CAUTION
3
INSTALLATION
3.1
UNPACK THE MACHINE
Make sure that you correctly assemble the machine before
use.
•
If the parts are damaged, do not use the machine.
•
If you do not have all the parts, do not operate the
machine.
•
If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
3.2
INSTALL THE UPPER HANDLE
1. Align the holes in the upper handle (3) and the lower
handle.
2. Put the bolt (7) through the hole.
3. Tighten the knob (8) onto the bolt (7).
4. Do the same operation on the other side.
6
MEANING
(Without Safety Alert Sym-
bol) Indicates a situation that
may result in property dam-
age.
WARNING
WARNING