Active/De-Active Timer Function - Denver Electronics MRD-165 Guide D'utilisation

Listing to tape
General operation
Stop / eject key
Fast forward key &
Fast rewind key
Play key
Pause key
Playback
 Select "tape" function (10).
 Put in the cassette tape.
 Press play key to active playback
 Adjust the volume control (14/24) to the desire level.
 Use pause key when you want to stop playback temporarily.
 Press stop / eject key when finished.
Remark:
It is possible to play both cassette players one after the other. If you press the button "pause" and "play" at deck 1 and button "play" at
deck 2, than the tape of deck 1 will be start to play automatically after the tape of deck 2 is finished.
More features
A. Sleep function (on remote control only)
1. Press " Sleep " button on remote control "SLP-120 " will shown on the LCD display (6).
2. Keep pressing the button to adjust the sleep timer in the order of 120>90> 60 > 45 >....15 minutes respectively and sleep icon
" " will indicate on LCD.
3. System will stop and go to standby mode automatically after running the selected time.
4. To cancel the sleep mode, press " Sleep " button until "SLP-off' displayed and the "
B. Timer clock setting (on remote control only)
This function allows the system to turn on automatically and wake you up by CD, DAB, FM Radio, USB/SD mode respectively.
First, set the unit at standby mode and then press & hold the " Timer " button on the remote control to enter the setting mode, the LCD
display will show "SET TIMER" then change to " SELECT SOURCE and timer "
1) Wake up source press the " Function " button repeatedly to select the source from " CD " -- " FM " -- "DAB "-- " USB " –"SD".
Press " Timer " button to confirm the selected source.
2) Wake up volume press the Skip up
confirm the wake up level.
3) Wake up time press Skip up
Skip up
Remark
If there is no music source being detected (such as USB/CD) when the preset time is reached, system will default to FM mode

automatically.
 For FM or DAB radio wake up, the system will preset at the latest radio frequency being listened before switching off.
 Please switch off the system manually during alarm wake up mode as the system will not turn off automatically after alarm on
mode.
 Active/de-active timer function
1. To active the timer, press once the " Timer " button on remote handset until the timer indicator "
2. To cancel timer function by press once again " Timer " button until the timer indicator "
C. Pre-set EQ function
This unit provides 4 differences sound mode to enhance your listening experience. You can select the desired effect by pressing the
" Preset EQ " button (22) repeatedly at following sequence:-
FLAT CLASSIC
press to stop all deck operation. Press again to open the cassette door.
press to start rapid tape winding in either forward or revers
direction. Press stop / fast rewind key eject keys when the cassette spools stop turning.
press to start playing tape.
press to stop tape operation temporarily. Press again to resume play.
/ down
/ down " button to set the hour & then press "Timer " button to enter the hours. Press
/ down " button to set minutes and press " Timer " button " to store the memory.
ROCK POP
" icon will flash on display :-
" button to adjust the wake up volume level then press "Timer" button to
JAZZ
English – 8
" indicator disappear on LCD display.
" is shown on LCD display (2).
" disappear.