Selecting The Mode - Saitek Competition Pro Game Clock Guide D'utilisation

Gameclock manual_EFGIS.qxd 12/20/2005
When in a MODE sub-menu: Scrolls RIGHT through the selected mode's
settings.
In EDIT mode: Moves the cursor RIGHT.
SLIDER SWITCHES
MODIFY / LOCK
A slider switch on the base of the Game Clock unit can lock the display
time and the number of moves to prevent them being modified during the
course of a game.
STOP / GO / SOUND OFF / LIGHTS OFF/SOUND AND LIGHTS OFF
The second slider switch on the base of the Saitek Competition Pro Game
Clock is used to switch the unit to OFF, GO, SOUND OFF, LIGHTS OFF,
SOUND AND LIGHTS OFF
When in the OFF position, all memory contents are preserved.
Switching to GO again will wake up the unit and return it to its state before
being turned to STOP.
Switching to SOUND OFF mode will switch off the buzzer and the other
functions in the same way as the GO mode.
Sliding the switch to SOUND AND LIGHTS OFF position turns the LED
indicators OFF. The sound is also OFF in this position.

SELECTING THE MODE

Turn the clock ON
For example, assume the timer mode is 1a (Hour Glass, 1minute)
Display for mode 1a, Hourglass Mode, 1 minute.
Click the 4-way Control Pad LEFT and RIGHT to select the required
MODE. For example, to choose Tournament Mode 3A - FIDE 1, press
RIGHT, RIGHT and TOURNAMENT should be displayed. The mode
11:52 AM Page 8
reference indicator should display - and the LCD screens should display --
:-- | --:-- when in the Top Level of the mode menu in Tournament and User
modes.
Press DOWN again and the mode reference indicator should display 3A,
which is the desired mode. The display should appear as follows:
Display for DELAY, Tournament mode 3A
To start the game, press one of the Time Control Buttons on top of the
Competition Pro Game Clock.
Note: The game clock displays {Hour:Minute}. When there are 20 minutes
or less remaining in the time, the display will change to display
{Minute.Second} and the {s} seconds indicator is also displayed at the
bottom right of the time.
Displaying the settings of a preset mode
When viewing a time mode, the settings can be displayed by pressing the
LEFT and RIGHT key. The display will cycle through the settings.
For example, in FIDE 1 (mode 3A), the default display will show 2:00 | 40.
This means 40 moves must be made in 2 hours for the PRIMARY time
phase.
Pressing RIGHT again will show -.-- | 0.00s. This means 0 seconds will be
added per move in the PRIMARY time phase.
Pressing RIGHT again will show 01:00 | 20. The phase indicator changes
to SECONDARY. This means 20 moves must be made in 1 hour.
Pressing RIGHT again will show -.-- | 0:00s. This means 0 seconds will be
added per move in the SECONDARY time phase.
Pressing RIGHT again will show 00:30 | 0. The phase indicator changes to
TERTIARY. This means there are 30 minutes left and no minimum move
requirements.