PEERLESS Mounts SmartMount SP740P Installation Et Assemblage page 10

Tension Adjustment
• Do not remove screw or loosen screw until it is no longer engaged with the mount. Doing so may cause the screen
to fall.
• If screws become loose over time, tighten screws as necessary. Tighten screws to 50 in. • lb (5.6 N.M.) maximum
torque.
If more or less tension is desired in the arm pivot points, do the following:
6
• To increase tension, turn tension screw(s) clockwise with 5 mm allen wrenchs (T). NOTE: Tighten screws to
50 in • lbs (5.6 N.m.) maximum torque.
• To reduce tension, turn tension screw(s) couter-clockwise with 5 mm allen wrenchs (T). NOTE: Do not turn more
than half a turn.
WARNING
TENSION SCREWS
10 of 42
All other brand and product names are trademarks or registered trademarks of their respective owners.
ISSUED: 05-18-05 SHEET #: 095-9235-9 12-05-09
© 2009, Peerless Industries, Inc. All rights reserved.
Peerless Industries, Inc.
www.peerlessmounts.com
3215 W. North Ave.
Melrose Park, IL 60160