Instructions For Use; Information About Safe Use; Assembling The Base Body; Assembly (Image 1) - WMF Twistfire Conseils D'utilisation Et D'entretien

3. Instructions for use

Please carefully read these instructions prior to start-up
and use. Refer to the illustrations on the front flap on
the inside.
Failure to comply may result in injuries and/or damages
to your property.
The fire light Twistfire can be used indoors and outdoors
in compliance with the following instructions for use.
3.1. Information about a safe location
Observe the respective valid local and national
regulations regarding the set-up of ethanol fireplaces.
For your Twistfire, choose an open location and main-
tain at least 1 metre of distance from flammable mate-
rials like home textiles, upholstery, shelves or cabinets.
Remember that curtains can be moved by draughts and
may come dangerously close to your Twistfire. Please be
sure to maintain a sufficient distance in this regard.
In particular during start-up and operation, place
your Twistfire on a level, horizontal and stable base.
The bearing capacity should be at least 50 kg.
Do not place any fl mmable objects on the appliance.

3.2. Information about safe use

Please note: The Twistfire is a decorative fireplace for
private use in your home or outdoors. It should not be
used for heating purposes.

Assembling the base body

Remove all of the packaging materials prior to assembly.
Review the package contents. Should individual parts be
damaged or the delivery is incomplete, do not operate
your Twistfire. Get in touch with your speciality retailer
or the WMF service department.
Place your fireplace on a level, horizontal and
stable base.
Image 1
Assembly
Screw the stainless steel base body onto the glass
base plate by screwing the threaded bolt on the under-
side of the base body to the screw nut located
in the plastic plate.
Do not apply strong pressure. The connection is
established when the three stands of the base body are
touching the glass plate.
Image 2
Opening the tank
Open the cap of the stainless steel tank with a slight
counter-clockwise turn.
Once the two arrows are facing each other, you can
open the cap.
Image 3
Filling the tank
You can safely fill the tank through the large opening
using commercial containers. Please note that the fill
level must not exceed the indicated
the inside of the tank.
marking on
17