Internal Connectors
Internal Buttons
Jumper
I/O Controller
Hardware Monitor
Form Factor
BIOS Features
6
Specifications
Continued from previous page
∙ 1x 24-pin ATX main power connector
∙ 1x 8-pin ATX 12V power connector
∙ 8x SATA 6Gb/s connectors
∙ 2x USB 2.0 connectors (supports additional 4 USB 2.0
ports)
∙ 2x USB 3.2 Gen1 connectors (supports additional 4 USB
3.2 Gen1 ports)
∙ 1x USB 3.2 Gen2 Type-C port
∙ 1x 4-pin CPU fan connector
∙ 1x 4-pin Water Pump connector
∙ 4x 4-pin system fan connectors
∙ 2x Front panel connectors
∙ 1x Front panel audio connector
∙ 1x RGB extension connector
∙ 1x TPM module connector
∙ 1x Virtual RAID on CPU connector
∙ 1x Thunderbolt add-on card connector
∙ 1x Power button
∙ 1x Reset button
∙ 1x Clear CMOS jumper
∙ 1x Chassis Intrusion connector
NUVOTON NCT6797 Controller Chip
∙ CPU/System temperature detection
∙ CPU/System fan speed detection
∙ CPU/System fan speed control
∙ ATX Form Factor
∙ 12 in. x 9.6 in. (30.5 cm x 24.3 cm)
∙ 2x 128 Mb flash
∙ UEFI AMI BIOS
∙ ACPI 6.0, SM BIOS 3.0
∙ Multi-language
Continued on next page