Rittal CMC III DK 7030.120 Notice D'installation Et Notice D'utilisation Succincte page 6

EN
Notes on documentation, Safety instructions, Product description
1 Notes on documentation
This installation and short user's guide is intended for experienced trained specialists and contains only
EN
the most important information concerning the assembly, installation and function of the
CMC III Infrared Access Sensor (subsequently called access sensor).
1.1 Associated documents
CMC III Infrared Access Sensor assembly, installation and user's guide.
It is available at www.rittal.com and contains the complete application-relevant information and techni-
cal data for the access sensor with regard to:
– Further assembly possibilities
– Functions
– Configuration possibilities
– Detailed operating instructions
– Troubleshooting
2 Safety instructions
– Assembly and installation of the access sensor may only be performed by experienced trained spe-
cialists.
– The access sensor housing must not be opened.
– The access sensor may not come in contact with water, aggressive or inflammable gases and va-
pours.
– The access sensor may only be operated within the specified environmental conditions (see
Section 3.4).
3 Product description
3.1 Functional description
The access sensor is used to monitor rack doors, side walls, roof plates or room doors. It signals to the
connected CMC III PU whether the monitored door is closed or open. The access sensor has an iden-
tification that allows it to be detected automatically by the CMC III PU.
3.2 Proper use
The CMC III Infrared Access Sensor is used only for the access monitoring on a server enclosure or a
room door. It may be used only together with the CMC III PU. Any other use is not permitted.
3.3 Scope of delivery
– CMC III Infrared Access Sensor
– Provided accessories (see Fig. 1)
– Installation and Short User's Guide
3.4 Operating conditions
The access sensor may only be operated under the following operating conditions:
Temperature operational range:
Humidity operational range:
Degree of protection:
5
+0°C to +55°C
5% to 95% relative humidity, non-condensing
IP30 in accordance with EN 60 529
Rittal CMC III Infrared Access Sensor