1.
Safe handling
Risk of death by electric shock!
Do not open the product.
Only ever connect the product
DANGER
to power mains with equipment
grounding conductor.
Prior to use, check for proper condition and
functioning of the product.
Observe
our
"Notes
Compatibility (EMC)".
To prevent damage caused by improper setup or
operation, and in order not to compromise
warranty and manufacturer liability:
– Use the product only according to these
instructions for use.
– Observe all safety information and maintenance
advisories.
– Ensure the manufacturer's approval before using
accessories that are not mentioned in the
instructions for use.
Ensure that the product and its accessories are
operated and used only by persons with the
requisite training, knowledge or experience.
Keep the instructions for use accessible for the
user.
Always adhere to applicable standards.
Ensure that the electrical facilities in the room in
which the device is being used conform to IEC
norms.
Unplug the device by pulling the plug, but never by
pulling the power cord.
Do not operate the product in explosion-hazard
areas.
Do not use the product if it is damaged or
defective. Set aside the product if it is damaged.
on
Electromagnetic
Note
This device can be used by children over the age of 8 as
well as by persons with reduced physical, sensory or
mental capacities or with lack of experience and
knowledge, if these persons are supervised or have been
instructed on how to use the device safely, and if they
understand the risks associated with the use of the
device. Children must not play with the device. Clean-
ing and user-maintenance must not be carried out by
children without supervision.
If the mains power cord of this device is damaged, it
must be replaced by the manufacturer, customer ser-
vice, or a similarly qualified person to prevent any risks
or hazards.
2.
Product description
2.1 System components
Designation
Clipper FAV5
Instructions for use
Note
The clipper blade GT330 #10 (USA+UK) for Clipper FAV5
is included in the scope of delivery. Various clipper
blades (SNAP ON type) can be used for different
applications!
2.2 Components necessary for use
• Clipper FAV5
• Clipper blade
Art. no.
GT105G
GT105J
GT105K
GT330 #10 (USA+UK)
TA012748
3