Troubleshooting List - Aesculap FAV5 Mode D'emploi/Description Technique

7.

Troubleshooting list

Malfunction
Clipper blade not mov-
ing
Clipper FAV5 cutting
poorly or not at all
Motor of Clipper FAV5
not running
Motor of Clipper FAV5
running very slowly
Finding
Clipper blade jammed
Clipper FAV5 not cutting Cutting edges of clipper
Cutting performance
insufficient
Overheating of clipper
blade
Clipper blade jammed
Clipper FAV5 not cutting Debris on electric con-
Smell of burning from
the machine housing
Clipper blade jammed
Atypical motor noises
Cause
Clipper blade not properly
engaged in its seating
Rocker arm defective
blade blunted
Animal hair too wet
Clipper blade lacking
shearing pressure
Cutting edges of cutting
head not honed correctly
Lack of lubrication of
clipper blade edges
Animal hair jammed in
clipper blade
tacts
Motor/Electronics defec-
tive
Motor burnt
Debris in clipper blade
Lack of lubrication of
clipper blade edges
Remedy
Properly engage the clipper
blade, see Chapter Attach-
ing the clipper blade
Replace rocker arm
Have product repaired by
the manufacturer
Only cut dry animal hair
Have product repaired by
the manufacturer
Have product repaired by
the manufacturer
Lubricate cutting edges of
clipper blade, see Chapter
Lubricating the clipper
blade
Demount clipper blade and
remove animal hair
Switch off Clipper FAV5 and
clean the contacts
Have product repaired by
the manufacturer
Have product repaired by
the manufacturer
Clean and lubricate the
clipper blade, see Chapter
Lubricating the clipper
blade
Lubricate cutting edges of
clipper blade, see Chapter
Lubricating the clipper
blade
9