Textron Ransomes Frontline 728 Manuel De L'opérateur Et De Sécurité page 17

RANSOMES 700 Series EC Tractors
SAFETY AND OPERATORS MANUAL
GB
OPERATION
LIFT LEVER (V)
Move the lift lever back and hold it there to raise the
cutterdeck. Move the lever forward and hold there to
lower the cutterdeck. Hold the lever for 1-2 seconds
after the cutterdeck contacts the ground to fully
lower the lift cylinder. This allows the deck to further
lower and adjust to ground contours.
THROTTLE LEVER (Y)
Move the throttle lever forward for faster engine
speeds. Move the throttle lever back for slower
engine speeds.
HOURMETER (Z)
Records total hours of engine operation.
SEAT SWITCH
A switch in the base of the seat is part of the tractor's safety interlock system. This switch stops the engine if
the operator leaves the seat when either the PTO is engaged or the transmission is out of neutral.
GB-15