How To Plug; How To Control The Unit - EXCELIGHTING TRI 48 PAR LIGHT Guide De L'utilisateur

6. How to plug :
Connect the power plug to the mains. Also connect the device to the
DMX512 network with 3 pin XRL cables if you want to use this mode.
7. How to control the unit:
The unit can operate in four differents way: Automatique Mode/Sound
mode, Master/Slave and DMX.
v AUTOMATIQUE MODE/SOUND MODE
2. A1. Solid Mode ←UP/DOWN→ 1-19
3. A2. Jump Mode ←UP/DOWN→ 1-19
4. A3. Rainbow mode ←UP/DOWN→ 1-19
5. A4. Sound active mode ←UP/DOWN→ 1-19
6. A5. Strobe Mode ←UP/DOWN→ 1-19
7. A6. Auto fade Mode Auto Run
8. A7. Scrolling Mode ←UP/DOWN→1-19
9. R. Solid Red Color intensity ←UP/DOWN→ 0-255
10. G. Solid Green Color intensity ←UP/DOWN→ 0-255
11. B. Solid Blue Color intensity ←UP/DOWN→ 0-255
12. U. Red+White Color Wash ←UP/DOWN→ 0-255
13. D. DMX Mode d.512
14. IP. IP Mode IP.64
v Master/Slave MODE
When no DMX controller is connected, the devices can
operate in master/slave. Choose the mode of functioning
of the first device (Auto, sound etc ... ), connect the
www.excelighting.com 17