Specifications; Installation - EXCELIGHTING TRI 48 PAR LIGHT Guide De L'utilisateur

v To clean the unit only use a dry, soft cloth, under no circumstances
use chemicals or water.
v EXCELIGHTING refuse to accept any responsibility if the fixture is
used for a purpose other than that for witch it was designed, if it is
not properly used or repaired by an authorized person.
When the device is definitively removed from the market, you have to deposi)
it in a recycling plant of closeness to contribute to its cleanup

2. Specifications:

v 4 Operate modes : DMX, sound, Auto and master/slave
v Supply : 200 - 240V - 50Hz
v Power : 20W
v Fuse : 3A
v LED : 9 x 3 W
v Dimensions :
v Weight : 1,5 kg

3. Installation :

The device must be installed through the holes located on the
mounting bracket . We recommend you to check that the unit is
securely fastened so that it does not feel any vibration while the
machine is running. It must not slip . It is mandatory to practice a
double hook with safety bond in case of failure of the main hang .
Make sure that the structure on which the unit is attached is
strong enough to support a weight of 10 times the device. Make
www.excelighting.com
Red/Blue/Green/Cyan/Amber/White/Purple/Orange/Pink
165*200*140 mm
15