Technical Specifications; Usb-Routing; General Specifications - Reloop KUT Mode D'emploi

5. TECHNICAL SPECIFICATIONS

5.1 USB-Routing

USB (Stereo Pair)
1+2
3+4
5+6
7+8
*Depending on the USB Source Switch's -28- position.

5.2 General Specifications

Power supply: ....................DC5V
Dimensions: .......................254 mm (W) X 355 mm (D) X 104 mm (H)
Weight: ..............................3.25 kg
Inputs:
CD: .................................47K OHM / 0 dBV(1V)
PHONO: .............................47K OHM /-36 dBV(15.85 mV)
AUX: .................................47K OHM /-3 dBV(1V)
MIC: .................................12K OHM /-36 dBV(15.85 mV) (Unbalance)
Outputs:
MASTER: ...........................1K OHM /-2.2 dBV (776 mV) ± 1 dB
BALANCED: .......................600 OHM /-2.2 dBV (776 mV) ± 1 dB
BOOTH: .............................600 OHM /-2.2 dBV (776 mV) ± 1 dB
PHONES: ...........................33 OHM /-13.3 dBV (216 mV) ± 1 dB
Frequency Response:
CD: .................................20 - 20K Hz +1/-1.5 dB
AUX: .................................20 - 20K Hz +1/-1.5 dB
PHONO: .............................20 - 20K Hz +1/-2 dB
MIC: .................................20 - 20K Hz +1/-2 dB
CUE: .................................20 - 20K Hz +1/-2dB
S/N Ratio:
CD: .................................83 dB
PHONO: .............................83 dB
AUX: .................................83 dB
MIC: .................................83 dB
6
Mixer Input (USB Out) Mixer Output (USB In)
CH1 Input USB Source CH1 Control Tone* (Signal Input Select set to USB)
CH1 Post Fader (Signal Input Select set to PHONO/LINE)
CH2 Input USB Source CH2 Control Tone * (Signal Input Select set to USB)
CH2 Post Fader (Signal Input Select set to PHONO/LINE)
Master In Mic/Aux Out
- Rec Out
, 3A, 15W