Table Des Matières; Safety Instructions; Application In Accordance With Regulations - Reloop KUT Mode D'emploi

CAUTION! For your own safety, please read this operation manual carefully before initial operation! All persons involved in the installation, setting-up, operation, mainte-
nance and service of this device must be appropriately qualified and observe this operation manual in detail. This product complies with the requirements of the appli-
cable European and national regulations. Conformity has been proven. The respective statements and documents are deposited at the manufacturer.
Before operating this equipment we ask you to carefully study and observe all instructions.
Please remove the Reloop KUT from its packaging. Check before initial operation to make sure that the device has not been visibly damaged during transport. If you detect any damage to the
power cable or the casing, do not operate the device. Contact your specialised dealer.
SAFETY INSTRUCTIONS ..............................................2
APPLICATION IN ACCORDANCE WITH REGULATIONS 2
MAINTENANCE ...........................................................2
1. OVERVIEW...............................................................3
1.1 GRAPHICS ..............................................................3
1.2 DESIGNATIONS .......................................................3
1.3 CONNECTING THE KUT: ...........................................4
2. OPERATION .............................................................4
2.1 POWER ON .............................................................4
2.2 SIGNAL INPUT SELECT ............................................4

SAFETY INSTRUCTIONS

CAUTION! Please exercise particular caution when handling AC100-240V~, 50/60Hz, 0.8A power voltage. This voltage rating may lead to a critical electrical shock! Any
damage caused by the non-observance of this operation manual excludes any warranty claims. The manufacturer is not liable for any damage to property or for personal
injury caused by improper handling or non-observance of the safety instructions.
- This device left the factory in perfect condition. To maintain this condition and to ensure a
risk-free operation the user must observe the safety instructions and warnings contained
in this operation manual.
- For reasons of safety and certification (CE) the unauthorised conversion and/or modification
of the device is prohibited. Please note that in the event of damage caused by the manual
modification to this device any warranty claims are excluded.
- The inside of the device does not contain any parts which require maintenance, with the
exception of wear parts that can be exchanged from the outside. Qualified staff must carry
out maintenance, otherwise the warranty does not apply!
- The fuse must exclusively be exchanged against fuses of the same class, with the same
trigger features and nominal current rating.
- Ensure that the power will only be supplied after the device has been fully set up. Always
plug in the mains plug last. Ensure that the mains switch is in the "OFF" position when
connecting the device to power.
- Only use cables that comply with regulations. Observe that all jacks and bushes are tighte-
ned and correctly hooked up. Refer to your dealer, if you have any questions.
- Ensure that when setting up the product, the mains cable is not squashed or damaged by
sharp edges.
- Prevent the mains cable from coming into contact with other cables! Exercise great care
when handling mains cables and connections. Never touch these parts with wet hands!
- Connect the power cable exclusively to appropriate shock-proof outlets. The only supply
point to be used is a supply outlet in accordance with specifications of the public supply
network.
- Disconnect the device from the supply outlet when not in use and before cleaning! Be sure
to hold the mains plug by the body. Never pull the mains cord!
- Position the device on a horizontal and stable low-flame base.
- Avoid any concussions or violent impact when installing or operating the device.
- When selecting the location of installation, make sure that the device is not exposed to ex-
cessive heat, humidity and dust. Be sure that no cables lie around openly. You will endanger
your own safety and that of others!

APPLICATION IN ACCORDANCE WITH REGULATIONS

- This device is a professional mixing console which can regulate and mix low level audio
signals. The device is thereby connected between a signal source and an audio amplifier or
active speakers, respectively.
- This product is authorised for connection to AC100-240V~, 50/60Hz, 0.8A and is designed
exclusively for indoor application.
MAINTENANCE
- Check the technical safety of the device regularly for damage to the mains line or the casing,
as well as for wear of wear parts such as rotary and sliding switches.
- If it is to be assumed that the safe operation is no longer feasible, then the device must
be disconnected and secured against accidental use. Always disconnect the mains plug
from the outlet!
2
2.3 GAIN ......................................................................4
2.4 EQUALIZER .............................................................4
2.5 LINEFADER .............................................................4
2.6 CROSSFADER .........................................................4
2.7 FADER-START .........................................................4
2.8 MIDI ON/OFF ..........................................................4
2.9 DJ MIC / AUX ..........................................................4
2.10 MONITORING ........................................................5
2.11 MASTER SECTION .................................................5
3. EFFECT UNIT ...........................................................5
- Do not rest any containers filled with liquid that could easily spill onto the device or in its
immediate vicinity. If, however, fluids should access the inside of the device, immediately
disconnect the mains plug. Have the device checked by a qualified service technician before
re-use. Damage caused by fluids inside the device is excluded from warranty.
- Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below
5° C) conditions. Keep the device away from direct exposure to the sun and heat sources
such as radiators, ovens, etc. (even during transport in a closed vehicle). Always ensure
sufficient ventilation.
- The device must not be operated after being taken from a cold environment into a warm
environment. The condensation caused hereby may destroy your device. Do not switch on
or operate the device until it has reached ambient temperature!
- Controls and switches should never be treated with spray-on cleaning agents and lubri-
cants. This device should only be cleaned with a damp cloth. Never use solvents or cleaning
fluids with a petroleum base for cleaning.
- When relocating, the device should be transported in its original packaging.
- When starting operation, the crossfaders and volume controls of your amplifier must be set
to minimum level. Bring the loudspeaker switches into the "OFF" position. Wait between 8
to 10 seconds before increasing the volume to avoid damage to loudspeakers and diplexer.
- Devices supplied by voltage should not be left in the hands of children. Please exercise
particular care when in the presence of children.
- At commercial facilities the regulations for the prevention of accidents as stipulated by the
organization of professional associations must be observed.
- At schools, training facilities, hobby and self-help workshops the operation of the device
must be monitored with responsibility by trained staff.
- Keep this operation manual in a safe place for later reference in the event of questions or
problems.
- If the device is used for any other purposes than those described in the operation manual,
damage can be caused to the product, leading to the exclusion of warranty rights. Moreover,
any other application that does not comply with the specified purpose harbours risks such
as short circuit, fire, electric shock, etc.
- The serial number determined by the manufacturer must never be removed to uphold the
warranty rights.
- It must be assumed that a safe operation is no longer feasible, if the device bears visible
defects, if the device no longer functions, following longer storage under unfavourable con-
ditions or after major transport stress.
3.1 OVERVIEW ..............................................................5
3.2 EFFECT SELECT, ROUTING .......................................5
3.3 EFFECTS ................................................................5
4. DRIVER INSTALLATION ...........................................5
5. TECHNICAL SPECIFICATIONS .................................6
5.1 USB-ROUTING ........................................................6
5.2 GENERAL SPECIFICATIONS ......................................6
6. MIDI CHART ............................................................7