Schneider SC300SB Serie Mode D'emploi page 54

CHANNEL
Channels:Display the scan sub
different Channel installation modes
Channel installation mode:Select on-screen display
channel sources.You can select the signal type.
•Antenna:Set the signal type to antenna When set to
Antenna,the TV can receive analog and digital
(DVB-T/DVB-T2)broadcasting signals
•Cable:Set the signal type to cable When set to
Cable,the TV can receive analog and QAM
broadcasting signals .
Auto Channel Update
Parental controls: Press
option then press OK button to enter the sub
Audio Channel: Press▼▲button to select the
option then press OK button to enter the sub
Open source licenses: Press▼▲button to select the
option then press OK button to enter the sub
Antenna
1
Channel Installation
Mode enter
or Cable
2
Channel
menu based on
-
.
.
.
.
button to select the
▼▲
. Menu -> Settings -> Channel
choose Antenna
,
.
. Enter Menu -> Settings
-> Channels .
3 Channel Scan directly enters the ATV+DTV
.
automatic search platform interface of Antenna
Update Scan
frequency points outside the station
Analog Manual Scan
After input the frequency point
up or down search station.
- menu .
menu
- .
menu
- .
Single RF Scan:DTV manual search,left and
right after selecting RF Channel,directly OK
search.
Cable
1 . Menu ->
Installation Mode, select Cable
2 . Enter Menu
->
->
-20-
: Re - automatically search for
: Manual ATV search station
,
Settings -> Channel -> Channel
.
-> Settings -> Channel
OPERATION
.
.
.
you can select
-> Channels .