Operation - Schneider SC300SB Serie Mode D'emploi

INITIAL SETUP
T he first you turn your TV,the setup wizard will guide
you through setting up basic settings.
Please according to the text tip to first time setup.
The setting below is about bluetooth synchronization
of the remote control
Please note that this product is not compatible with
this feature.
Please use the Back button to continue installing the
product
This function is used for the remote control pair code.
After the code is successful,you can use the Bluetooth
remote control to operate the TV. If you don't need to
use the Bluetooth remote control, you can press the
BACK button to skip this step.
Press▼▲ to select the system language and press
OK to confirm the language.
Connect your Android phone to your TV
" "
Continue to continue the connection
" "
Skip to skip this step
Press▼▲ to select the the Wifi to connect,press
OK and enter the password to confirm the
connection is successful.You can also try use
Ethernet and skip select network.
select
,
, and choose
.
By accepting the Google Terms of Service to improve
the product experience
condition.
Agree to Google to get the location information of your
device to get more features,choose YES to accept.
By agreeing to automatically send diagnostic information
to Google to improve discriminative power, choose YES
to accept.
1.Your device is powered by Android TV and press the▶
button to select the browsing feature.
2.You can get more apps from Google Play and press
the▶button to go to the next screen.
3.Transfer photos and other content to the TV via the
built-in chromecast, press OK to complete the browsing.
Press▼▲ to select the country of your device and
press OK to confirm.
Used to set your device's password to ensure
security and privacy.
Press OK to pop up the soft keyboard
the remote control to enter the 4
automacically jump to the next interface
-17-

OPERATION

" "
select Accept to accept this
,
" "
, and use
digit password
-
.
" "