Attaching The Dust Cover - Yamaha MusicCast VINYL 500 Mode D'emploi

Attaching the dust cover

The dust cover protects this unit from dust etc.
1
Insert the hinges into the appropriate locations at two sides of the
dust cover.
2
Attach the dust cover by inserting the hinges into the hinge bases
located on the back panel of the unit.
Hinge base
NOTE

To remove the dust cover, grasp the two sides of the dust cover and slowly
lift upward to remove the cover together with its hinges.
CAUTION

Take care not to pinch your hands or fingers when opening or closing the
dust cover.
|
Getting ready Assembly
17
En