REICH easydriver pro 1.8 Instructions D'assemblage Et Mode D'emploi page 23

Index
1. Product description
2. General information
3. Safety instructions
4. Installation situation
5. Installation, mechanics
6. Installation, electrical
system
7. Commissioning/operation
8. Notes/warnings
Appendix
A1 Synchronisation
A2 Manually swivelling the
drive rollers on or off
A3 Maintenance
A4 Comments and
recommendations
A5 FAQ
A6 Warranty regulations
A7 Declaration of conformity
List of images
 Delivery scope
 Remote control
 Motor drive
- Assembly
+ Installation dimension
 Connection plan
1. Product description
The name "easydriver" is used in these instructions
instead of "easydriver pro" to increase simplicity and
clarity.
The easydriver is part of the technical product range of
Reich GmbH. The design of the manoeuvring drive was
based on practical experience and was undertaken with
great diligence.
easydriver is permanently attached to a caravan or
trailer. Only the right
drive unit are coupled to the tyres for marshalling pur-
poses. They are decoupled from the tyres after
manoeuvring.
The caravan or trailer is powered by two 12V electrical
motors. The remote control provided facilitates conven-
ient and safe manoeuvring. Symbols on the remote
control indicate the respective driving direction.
and the left
GB1