Table des Matières
Publicité
PICTURE SHOWS "HOSE KIT" ASSEMBLED AND WITH THE MIDDLE SUPPORT
FROST WARNING!
that there is no water remaining in the system. Start the blower in case there is a bubble system installed
and let it run approx. for 5 seconds. Repeat this procedure three times.
A cover shelf covers and protects the hose for the blower.
www.badetonneholz.de
www.badestampselges.com
HAVING CUT-OUTS FOR VALVES
If the Hot Tub is emptied and there is a risk for freezing, it is very important
│
www.bainnordiques.fr
Updated 01 20 2017
WARNING!
The blower must be placed at
least 10 cm above the ground
for the suction to work.
It
horizontally
connection on the air hose
should
preventing water getting into
the pump.
The blower is controlled by a
pressure
pressure switch via an air
hose. The power cord from
the pump connects to the
cord from the coupling box.
│
www.vildmarksbadtre.dk
│
www.vascatinozzabotte.it
should
be
placed
or
the
valve
face
downwards
valve
and
a
│
www.hottubhouten.nl
Publicité
Table des Matières
