Schneider SC100SND Manuel D'utilisation page 32

Wall mounting advice
• In order to avoid damage to the equipment and personal injury you should get a
qualified person to drill the fixing surface and fit the appropriate wall fixings.
• Take care not to allow the main unit to fall while attempting to hook onto the wall
mount brackets.
• Before mounting, check the wall strength; consult qualified personnel if
necessary.
• When drilling into walls, always check that there are no hidden wires or pipes
etc.
• Make sure the screws and wall plugs are suitable for supporting the unit.
2. Drill holes as marked in step 1.
3. Insert 2 screws (not supplied) into the
holes and tighten. Take care to leave 5mm
between the screw heads and the wall.
NOTE: You will need to ensure the screws
are long enough to sufficiently grip the wall
while allowing 5mm between screw head
.
and wall
4. Hook the Sound bar into the screws.
For secure mounting, ensure the screw
heads slide firmly into the narrow part of
the brackets.
- 31 -