Hoonved HC 3 - HSP 3 Mode D'emploi Et Entretien page 24

ENGLISH
Draining function for machines with drainage pump
(optional upon request of the client)
For machines fitted with a drainage pump
it is possible to empty the tank setting in action the pump
like below described:
By machine ignited and it carries opened, to uncouple
the overflow, keep pressed the (S5) button until the
wash tank will be completely empty.
Emptied the bathtub it is necessary to extinguish the car
before to close the door.
At the end of the drainage, restore the filter (22) and the
overflow (21) to their respective positions.
2.1.f Switching off at the end of the day
At the end of the working day SWITCH OFF the
machine by pressing the power switch (Q1) into
the OFF position.
Switch off the mains switch feeding the machine
and close the water supply taps.
For any repairs, contact only assistance centres
authorised by the manufacturer.
2.1.g Warnings during the operation
1) Avoid immersing bare hands in the detergent-filled
water; if this should happen, rinse immediately and
thoroughly with running water;
2) Use only anti-foaming detergents, specifics for use
in industrial machines;
3) Deactivate the machine in case of break-down or
malfunction.
For any repairs, contact only assistance centres autho-
rised by the manufacturer, and insist on the use of
original parts.
4) In no case should you change the the original for-
mulations without first consulting an authorised
assistance centre;
5) When the machine is operating, do not open the
door too rapidly.
6) Wash tank water should be changed at least twice a
day or according to daily wash requirements.
Failure to follow the above warnings may compromi
se the safety of the washing machine.
24
S5
Part 2: For the operator
2.1.h Useful advice for better washing results
Any unsatisfactory results from washing can be seen
when traces of dirt are left on dishes or other items; any
water marks may be caused by insufficient rinsing.liited
detergent, ineffective detergent.
In this case, where insufficient, ensure that the rinsing
nozzles (26) are clean
and that there is pressure in the water system.
If there are traces of waste, ensure that:
- The filter (22) are clean;
- the water temperature is around 55-60°C;
- items are correctly positioned in the basket;
- the washing/rinsing nozzles are clean;
- the arms (24) (25) rotate freely.