Geonav 7C Manuel D'emploi Et D'installation page 36

Setup
• Track Density (DIST/AUTO/TIME)
Selects and sets the tracking interval between fixed dis-
tance, fixed time or automatic (in this case, in order to
save memory, the track is automatically smoothed).
• Heading Filter (ON/OFF)
Enables/disables the heading value filter.
• Set XTD Limit (ON/OFF)
Sets the maximum deviation allowed from the route set.
• Calibration (ON/OFF)
Calibrates the ship's position received by the GPS.
GENERAL
• Language (EN/FR/ES/DE/
DK/IT/SV/NL/SU/NO/GR)
Selects the language.
• Distance Units (NAUT/
METR/STAT)
Selects distance units.
• Depth Units (M/FT/FA)
Selects depth units.
• Network (ON/OFF)
Enables/disables the network connection (see the Geonav
Link Network Section).
• Network IP address (ON/OFF)
Changes the network settings (see the Geonav Link Net-
work Section).
• Welcome Message (ON/OFF)
Enables/disables the display of a message in the welcome
page, appearing as the instrument is turned on. By select-
ing ON, a window will allow writing or editing the mes-
sage.
English
68
WINDOWS
• Selects the auxiliary win-
dows to display. For every
window, a preview image -
whose display can be en-
abled/disabled (ON/OFF) - is
available.
SELECT CHART...
• Selects the chart to load from
the CompactFlash™. By se-
lecting ON, a window will
show the catalog of the charts
stored in the cartridge. The
chart currently loaded is
marked by an asterisk.
Select the new chart by the
joystick and press ENTER to
confirm the selection, or EXIT
to exit. Press GOTO to display
the information associated
with the chart.
69
English